Danubehome logo
Go back
New In

FC LP Magnetic Fabric Care Kit Small

SKU: 151501900452


Specifications
Magnetic
1 x 250ml Carpet & Upholstery Cleaner | 1 x 250ml Carpet & Upholstery Protector | 1 x 250ml Stain & Odour Eliminator | 3 x Trigger | 1 x 125ml Fabric Stain Remover | 1 x 125ml Resistant Stain Remover | 3 x Oxy Clean | 1 x Sponge | 2 x Microfibre Cloth | 1 x Leaflet
Features

Fabric Cleaners & Stain Removers Carpet & Upholstery Cleaner: An all-round cleaner and stain remover. Use it to remove every type of stain if it is fresh. If the stain has dried, then one of our specialist stain removers may also be necessary.

Fabric Stain Remover: A specialist stain remover used for removing shoe polish, red wine, fruit juice, chocolate, ketchup, and other types of food staining.

Resistant Stain Remover: A strong cleaner that's great for removing tea, coffee, alcohol, and urine. It's also great for removing any leftover staining that the Fabric Stain Remover failed to remove.

Oxy Clean: If there are any yellow or brown marks left by stains, use this to finish them off.

Stain & Odour Eliminator: Great for freshening all fabrics where pets have been lying and for removing urine odours.

Carpet & Upholstery Protector:

Shake the Carpet & Upholstery Protector well. Spray the Protector onto the fabric and allow to dry. If the fabric is a tight weave, just spray enough Protector on so the surface becomes damp. You can work the protector in with a cloth or brush if the fabric has a little protection as standard.

If the fabric has a loose weave, or a heavy pile (like with carpets) then apply more Protector to ensure you coat all fibres with the Carpet & Upholstery Protector.

Care Instructions & Warranty

It may not be necessary to use all products listed to remove a stain. Not all kits contain every stain remover. Skip to the next stain remover in the list in these instances.

Step 1: Carpet & Upholstery Cleaner Blot with a cloth to remove any excess stain. Wet stain with Carpet & Upholstery Cleaner. Agitate with cloth. Leave 10 minutes. Blot. Rinse with cold water and blot again.

Step 2: Fabric Stain Remover Wet area with Fabric Stain Remover. Agitate with cloth. Blot to absorb the stain. Reapply until no more stain is removed. Wet the area again with the Fabric Stain Remover. add kitchen towel, apply pressure (add book/weight). Leave to dry. Rinse with cold water and blot.

Step 3: Resistant Stain Remover Ensure the area has been thoroughly rinsed to remove all previous cleaning residues. Wet the area with Resistant Stain Remover. Blot. Rinse with cold water Blot.

Step 4: Oxy Clean Only use Oxy Clean if there are residues of yellow/brown staining. Ensure the area has been thoroughly rinsed to remove all previous cleaning residues. Dissolve 5 grams of Oxy Clean in 100ml of warm or hot water. Pour into a spray bottle, or dab onto the stain. Leave to dry.

Step 5: Carpet & Upholstery Protector

We recommend applying the Protector to carpets and upholstery on an evening so you can leave them to dry overnight.

It is advised to spray high-use areas first and more generously. This would be seating cushions and arm or head rests on upholstery, and corridors and doorways on carpets.

You only need to spray enough carpet protector onto the fabric so that it dampens the surface.

The product takes 24 hours to fully repel liquids.

Assembly
Do It Yourself
No
No

Note :
The product FC LP Magnetic Fabric Care Kit Small images have props used for illustrative purposes. Product Color may vary slightly due to photographic lighting or your screen settings.

Did You Find The Information You're Looking For? We Value Your Feedback. Did You Find The Information You're Looking For? We Value Your Feedback.